Used with BASS_FXGetParameters and BASS_FXSetParameters to retrieve and set the parameters of a DX8 chorus effect.
typedef struct {
float fWetDryMix;
float fDepth;
float fFeedback;
float fFrequency;
DWORD lWaveform;
float fDelay;
DWORD lPhase;
} BASS_DX8_CHORUS;
| fWetDryMix | Ratio of wet (processed) signal to dry (unprocessed) signal. Must be in the range from 0 through 100 (all wet). The default value is 50. |
| fDepth | Percentage by which the delay time is modulated by the low-frequency oscillator (LFO). Must be in the range from 0 through 100. The default value is 10. |
| fFeedback | Percentage of output signal to feed back into the effect's input, in the range from -99 to 99. The default value is 25. |
| fFrequency | Frequency of the LFO, in the range from 0 to 10. The default value is 1.1. |
| lWaveform | Waveform of the LFO... 0 = triangle, 1 = sine. By default, the waveform is sine. |
| fDelay | Number of milliseconds the input is delayed before it is played back, in the range from 0 to 20. The default value is 16 ms. |
| lPhase | Phase differential between left and right LFOs, one of BASS_DX8_PHASE_NEG_180, BASS_DX8_PHASE_NEG_90, BASS_DX8_PHASE_ZERO, BASS_DX8_PHASE_90 and BASS_DX8_PHASE_180. The default value is BASS_DX8_PHASE_90. |